IMU PCB Module for OEMs
Tiny PCB module for OEMs, with advanced embedded sensor fusion.
Embed our 1000Hz IMU into your design.
Micro-miniature PCB
Size
15 x 15 mm SMT module easily fits
on your custom board.
Fast On-board Sensor Fusion
1000Hz update rate sensor fusion
via UART, I2C, or USB (external).
High-Quality MEMS Sensors
Durable, field tested equipment.
Cutting edge sensor technology.
Technical data
Sensors
Highest quality MEMS sensors
3-axis accelerometer, gyroscope, magnetometer
Barometric sensor
Sample Rate
Selectable output data rate
1000 Hz internal update rate
Size
15 x 15 x 2mm
Weight
4g
Orientation
Drift free, 3D rotation
0.5° static accuracy
2° dynamic accuracy
Full 360° range for each axis
Communication Protocols
UART
SPI
USB 2.0
Latency
1ms (at 1000Hz rate)
Sensor specs
The MotionNode PCB module is a precision inertial measurement unit designed for embedding directly onto your custom PCB.
The IMU module takes high speed measurements and uses a state-of-the-art sensor fusion algorithm to output the device's rotation.
Measurements are synced with an internal temperature controlled oscillator (TCXO). IMU Data can be read from the module via UART, SPI, or USB interface. USB requires an external transceiver (see our USB dev-kit)
We design and manufacture our sensors in the USA. We use only the highest quality miniature inertial sensors in our products.
| Range | Resolution | Noise | |
|---|---|---|---|
| Accelerometer | ±8 g | 0.18 mg | 70 µg/√Hz |
| Gyroscope | ±2000 °/s | 0.06 °/s | 2.8 mdps/√Hz |
| Magnetometer | ±8 gauss | 0.25 mG | 0.4 mG/√Hz |
Embedded dev-kit
Purchase a MotionNode embedded dev-kit, with firmware examples showing how to interface via UART or SPI to a host microcontroller or other processor.
The dev-kit includes a MotionNode PCB module connected to a host embedded processor, and provides USB connectivity to your PC.
USB dev-kit
Purchase a MotionNode USB dev-kit if your intended application is USB connectivity for an embedded system.
The dev-kit includes a MotionNode PCB module connected connected over USB 2.0 via a USB-C connector. Connect this to any host computer (PC, Mac, Arm SBC, etc) running our MotionNode software to stream and record IMU data.
Trust our proven solution
Field tested by the best and brightest in companies, research labs, and academic institutions.
